- Marine DIN PN10 Cast Steel Gate Valve(Soft Seat)
- Ref ID:202
- 1.End Type:Flange
- 2.DN:40mm-400mm
- 3.PN:10
- 4.Design Standard:DIN3202-F4/F5(FTF)
- 5.End Standard:DIN2532
Main Material
Body/Bonnet: GSC-25NDisc: METAL WITH NBR
Seat: SS410/Gunmetal
Stem: SS410/BRASS
Applicable Scope
Oil,Water,GasAdditional Info
Trademark: RIKEX Or OEMPainting: Grey/Silver/Red/Blue Or RAL Color
Packing: Plywood case packing
Transportation: By Sea/Air/Express
Products Description
IMPA/ISSA | PN | DN | Face to face | Flange diam. | Flange Pitch | Flange Hole | RIKEX ID |
(mm) | L(mm) | D(mm) | C(mm) | n*d(mm) | |||
PN10 | 40 | 140 | 150 | 110 | 4×Ф18 | 202-01 | |
PN10 | 50 | 150 | 165 | 125 | 4×Ф18 | 202-02 | |
PN10 | 65 | 170 | 185 | 145 | 4×Ф18 | 202-03 | |
PN10 | 80 | 180 | 200 | 160 | 8×Ф18 | 202-04 | |
PN10 | 100 | 190 | 220 | 180 | 8×Ф18 | 202-05 | |
PN10 | 125 | 200 | 250 | 210 | 8×Ф18 | 202-06 | |
PN10 | 150 | 210 | 285 | 240 | 8×Ф23 | 202-07 | |
PN10 | 200 | 230 | 340 | 295 | 8×Ф23 | 202-08 | |
PN10 | 250 | 250 | 395 | 350 | 12×Ф23 | 202-09 | |
PN10 | 300 | 270 | 445 | 400 | 12×Ф23 | 202-10 | |
PN10 | 350 | 290 | 505 | 460 | 16×Ф23 | 202-11 | |
PN10 | 400 | 310 | 565 | 515 | 16×Ф27 | 202-12 | |
PN10 | 500 | 350 | 670 | 620 | 20×Ф27 | 202-13 | |
PN10 | 600 | 390 | 780 | 725 | 20×Ф30 | 202-14 | |
Note: | 1.Face to face according to DIN3202-F4 | ||||||
IMPA/ISSA | PN | DN | Face to face | Flange diam. | Flange Pitch | Flange Hole | RIKEX ID |
(mm) | L(mm) | D(mm) | C(mm) | n*d(mm) | |||
PN10 | 40 | 140 | 150 | 110 | 4×Ф18 | 202-15 | |
PN10 | 50 | 150 | 165 | 125 | 4×Ф18 | 202-16 | |
PN10 | 65 | 170 | 185 | 145 | 4×Ф18 | 202-17 | |
PN10 | 80 | 180 | 200 | 160 | 8×Ф18 | 202-18 | |
PN10 | 100 | 190 | 220 | 180 | 8×Ф18 | 202-19 | |
PN10 | 125 | 200 | 250 | 210 | 8×Ф18 | 202-20 | |
PN10 | 150 | 210 | 285 | 240 | 8×Ф23 | 202-21 | |
PN10 | 200 | 230 | 340 | 295 | 8×Ф23 | 202-22 | |
PN10 | 250 | 250 | 395 | 350 | 12×Ф23 | 202-23 | |
PN10 | 300 | 270 | 445 | 400 | 12×Ф23 | 202-24 | |
PN10 | 350 | 290 | 505 | 460 | 16×Ф23 | 202-25 | |
PN10 | 400 | 310 | 565 | 515 | 16×Ф27 | 202-26 | |
PN10 | 500 | 350 | 670 | 620 | 20×Ф27 | 202-27 | |
PN10 | 600 | 390 | 780 | 725 | 20×Ф30 | 202-28 | |
Note: | 1.Face to face according to DIN3202-F4 & Yoke Tpye | ||||||
IMPA/ISSA | PN | DN | Face to face | Flange diam. | Flange Pitch | Flange Hole | RIKEX ID |
(mm) | L(mm) | D(mm) | C(mm) | n*d(mm) | |||
PN10 | 40 | 240 | 150 | 110 | 4×Ф18 | 202-29 | |
PN10 | 50 | 250 | 165 | 125 | 4×Ф18 | 202-30 | |
PN10 | 65 | 270 | 185 | 145 | 4×Ф18 | 202-31 | |
PN10 | 80 | 280 | 200 | 160 | 8×Ф18 | 202-32 | |
PN10 | 100 | 300 | 220 | 180 | 8×Ф18 | 202-33 | |
PN10 | 125 | 325 | 250 | 210 | 8×Ф18 | 202-34 | |
PN10 | 150 | 350 | 285 | 240 | 8×Ф23 | 202-35 | |
PN10 | 200 | 400 | 340 | 295 | 8×Ф23 | 202-36 | |
PN10 | 250 | 450 | 395 | 350 | 12×Ф23 | 202-37 | |
PN10 | 300 | 500 | 445 | 400 | 12×Ф23 | 202-38 | |
Note: | 1.Face to Fact according to DIN3202-F5 |