Marine DIN PN10 Cast Steel Gate Valve(Yoke)_Marine DIN Flanged Gate Valve

Office Time:
Marine Valves
Industrial Valves

Home products → Marine Products → Marine DIN Valve → Marine DIN Flanged Gate Valve →

Marine DIN PN10 Cast Steel Gate Valve(Yoke): Ref ID:200; 1.End Type：Flange; 2.DN：40mm-400mm; 3.PN：10; 4.Design Standard：DIN3202-F4(FTF); 5.End Standard：DIN2532

Main Material

    Body/Bonnet:  GSC-25N
    Disc:  GG25/GSC-25N/BC6/GGG40
    Seat:  SS410/Gunmetal
    Stem:  SS410/BRASS

Applicable Scope

Cold and hot fresh water,Saltwater,Lubricating oil,Steam etc.

Additional Info

    Trademark:   RIKEX Or OEM
    Painting:   Grey/Silver/Red/Blue Or RAL Color
    Packing:  Plywood case packing
    Transportation:   By Sea/Air/Express

Products Description

IMPA/ISSA	PN	DN	Face to face	Flange diam.	Flange Pitch	Flange Hole	RIKEX ID
		(mm)	L(mm)	D(mm)	C(mm)	*nd(mm)**
	PN10	40	140	150	110	4×Ф18	200-01
	PN10	50	150	165	125	4×Ф18	200-02
	PN10	65	170	185	145	4×Ф18	200-03
	PN10	80	180	200	160	8×Ф18	200-04
	PN10	100	190	220	180	8×Ф18	200-05
	PN10	125	200	250	210	8×Ф18	200-06
	PN10	150	210	285	240	8×Ф23	200-07
	PN10	200	230	340	295	8×Ф23	200-08
	PN10	250	250	395	350	12×Ф23	200-09
	PN10	300	270	445	400	12×Ф23	200-10
	PN10	350	290	505	460	16×Ф23	200-11
	PN10	400	310	565	515	16×Ф27	200-12
	PN10	500	350	670	620	20×Ф27	200-13
	PN10	600	390	780	725	20×Ф30	200-14
Note:	1.Outside screwed stem and yoke; Rising Stem; Non-rising Handwheel; Bolted Bonnet

IMPA/ISSA	PN	DN	Face to face	Flange diam.	Flange Pitch	Flange Hole	RIKEX ID
		(mm)	L(mm)	D(mm)	C(mm)	*nd(mm)**
	PN10	40	140	150	110	4×Ф18	200-15
	PN10	50	150	165	125	4×Ф18	200-16
	PN10	65	170	185	145	4×Ф18	200-17
	PN10	80	180	200	160	8×Ф18	200-18
	PN10	100	190	220	180	8×Ф18	200-19
	PN10	125	200	250	210	8×Ф18	200-20
	PN10	150	210	285	240	8×Ф23	200-21
	PN10	200	230	340	295	8×Ф23	200-22
	PN10	250	250	395	350	12×Ф23	200-23
	PN10	300	270	445	400	12×Ф23	200-24
	PN10	350	290	505	460	16×Ф23	200-25
	PN10	400	310	565	515	16×Ф27	200-26
	PN10	500	350	670	620	20×Ф27	200-27
	PN10	600	390	780	725	20×Ф30	200-28
Note:	1.Outside screwed stem and yoke; Rising Stem; Non-rising Handwheel; Bolted Bonnet
	2.Double pitch threaded stem(fast opening/closing) and drain plug

IMPA/ISSA	PN	DN	Face to face	Flange diam.	Flange Pitch	Flange Hole	RIKEX ID
		(mm)	L(mm)	D(mm)	C(mm)	*nd(mm)**
	PN10	40	140	150	110	4×Ф18	200-29
	PN10	50	150	165	125	4×Ф18	200-30
	PN10	65	170	185	145	4×Ф18	200-31
	PN10	80	180	200	160	8×Ф18	200-32
	PN10	100	190	220	180	8×Ф18	200-33
	PN10	125	200	250	210	8×Ф18	200-34
	PN10	150	210	285	240	8×Ф23	200-35
	PN10	200	230	340	295	8×Ф23	200-36
	PN10	250	250	395	350	12×Ф23	200-37
	PN10	300	270	445	400	12×Ф23	200-38
	PN10	350	290	505	460	16×Ф23	200-39
	PN10	400	310	565	515	16×Ф27	200-40
	PN10	500	350	670	620	20×Ф27	200-41
	PN10	600	390	780	725	20×Ф30	200-42
Note:	1.Outside screwed stem and yoke; Rising Stem; Non-rising Handwheel; Bolted Bonnet
	2.Drain plug; Grease nipple