Marine DIN PN10 Cast Steel Gate Valve_Marine DIN Flanged Gate Valve

Office Time:
Marine Valves
Industrial Valves

Home products → Marine Products → Marine DIN Valve → Marine DIN Flanged Gate Valve →

Marine DIN PN10 Cast Steel Gate Valve: Ref ID:198; 1.End Type：Flange; 2.DN：40mm-400mm; 3.PN：10; 4.Design Standard：DIN3202-F4/F5(FTF); 5.End Standard：DIN2532

Main Material

    Body/Bonnet:  GSC-25N
    Disc:  SS410/Gunmetal
    Seat:  SS410/Gunmetal
    Stem:  SS410/BRASS

Applicable Scope

Cold and hot fresh water,Saltwater,Lubricating oil,Steam etc.

Additional Info

    Trademark:   RIKEX Or OEM
    Painting:   Grey/Silver/Red/Blue Or RAL Color
    Packing:  Plywood case packing
    Transportation:   By Sea/Air/Express

Products Description

IMPA/ISSA	PN	DN	Face to face	Flange diam.	Flange Pitch	Flange Hole	RIKEX ID
		(mm)	L(mm)	D(mm)	C(mm)	*nd(mm)**
	PN10	40	140	150	110	4×Ф18	198-01
	PN10	50	150	165	125	4×Ф18	198-02
	PN10	65	170	185	145	4×Ф18	198-03
	PN10	80	180	200	160	8×Ф18	198-04
	PN10	100	190	220	180	8×Ф18	198-05
	PN10	125	200	250	210	8×Ф18	198-06
	PN10	150	210	285	240	8×Ф23	198-07
	PN10	200	230	340	295	8×Ф23	198-08
	PN10	250	250	395	350	12×Ф23	198-09
	PN10	300	270	445	400	12×Ф23	198-10
	PN10	350	290	505	460	16×Ф23	198-11
	PN10	400	310	565	515	16×Ф27	198-12
	PN10	500	350	670	620	20×Ф27	198-13
	PN10	600	390	780	725	20×Ф30	198-14
Note:	1.This Type with the position indicator & drain plug.
	2.Inside screwed stem; Bolted Bonnet; Non-Rising Handwheel.
	3.Face to face according to DIN3202-F4

IMPA/ISSA	PN	DN	Face to face	Flange diam.	Flange Pitch	Flange Hole	RIKEX ID
		(mm)	L(mm)	D(mm)	C(mm)	*nd(mm)**
	PN10	40	140	150	110	4×Ф18	198-15
	PN10	50	150	165	125	4×Ф18	198-16
	PN10	65	170	185	145	4×Ф18	198-17
	PN10	80	180	200	160	8×Ф18	198-18
	PN10	100	190	220	180	8×Ф18	198-19
	PN10	125	200	250	210	8×Ф18	198-20
	PN10	150	210	285	240	8×Ф23	198-21
	PN10	200	230	340	295	8×Ф23	198-22
	PN10	250	250	395	350	12×Ф23	198-23
	PN10	300	270	445	400	12×Ф23	198-24
	PN10	350	290	505	460	16×Ф23	198-25
	PN10	400	310	565	515	16×Ф27	198-26
	PN10	500	350	670	620	20×Ф27	198-27
	PN10	600	390	780	725	20×Ф30	198-28
Note:	1.Inside screwed stem; Bolted Bonnet; Non-Rising Handwheel.
Note:	2.Face to face according to DIN3202-F4
IMPA/ISSA	PN	DN	Face to face	Flange diam.	Flange Pitch	Flange Hole	RIKEX ID
		(mm)	L(mm)	D(mm)	C(mm)	*nd(mm)**
	PN10	40	240	150	110	4×Ф18	198-29
	PN10	50	250	165	125	4×Ф18	198-30
	PN10	65	270	185	145	4×Ф18	198-31
	PN10	80	280	200	160	8×Ф18	198-32
	PN10	100	300	220	180	8×Ф18	198-33
	PN10	125	325	250	210	8×Ф18	198-34
	PN10	150	350	285	240	8×Ф23	198-35
	PN10	200	400	340	295	8×Ф23	198-36
	PN10	250	450	395	350	12×Ф23	198-37
	PN10	300	500	445	400	12×Ф23	198-38
Note:	1.Inside srewed stem; Bolted Bonnet; Non-Rising Handwheel
Note:	2.Face to Fact according to DIN3202-F5