Marine DIN PN10 Cast Iron Gate Valve_Marine DIN Flanged Gate Valve

Office Time:
Marine Valves
Industrial Valves

Home products → Marine Products → Marine DIN Valve → Marine DIN Flanged Gate Valve →

Marine DIN PN10 Cast Iron Gate Valve: Ref ID:197; 1.End Type：Flange; 2.DN：40mm-400mm; 3.PN：10; 4.Design Standard：DIN3202-F4/5(FTF); 5.End Standard：DIN2532

Main Material

    Body/Bonnet:  GG25
    Disc:  SS410/Gunmetal
    Seat:  SS410/Gunmetal
    Stem:  SS410/BRASS

Applicable Scope

Cold and hot fresh water,Seawater,Lubricating oil,Steam,etc.

Additional Info

    Trademark:   RIKEX Or OEM
    Painting:   Grey/Silver/Red/Blue Or RAL Color
    Packing:  Plywood case packing
    Transportation:   By Sea/Air/Express

Products Description

IMPA/ISSA	PN	DN	Face to face	Flange diam.	Flange Pitch	Flange Hole	RIKEX ID
		(mm)	L(mm)	D(mm)	C(mm)	*nd(mm)**
755571	PN10	40	140	150	110	4×Ф18	197-01
755572	PN10	50	150	165	125	4×Ф18	197-02
755573	PN10	65	170	185	145	4×Ф18	197-03
755574	PN10	80	180	200	160	8×Ф18	197-04
755575	PN10	100	190	220	180	8×Ф18	197-05
755576	PN10	125	200	250	210	8×Ф18	197-06
755577	PN10	150	210	285	240	8×Ф23	197-07
755578	PN10	200	230	340	295	8×Ф23	197-08
755579	PN10	250	250	395	350	12×Ф23	197-09
755580	PN10	300	270	445	400	12×Ф23	197-10
755581	PN10	350	290	505	460	16×Ф23	197-11
755582	PN10	400	310	565	515	16×Ф27	197-12
755583	PN10	500	350	670	620	20×Ф27	197-13
755584	PN10	600	390	780	725	20×Ф30	197-14
Note:	1.This Type with the position indicator & drain plug.
	2.Inside screwed stem; Bolted Bonnet; Non-Rising Handwheel. 3.Face to face according to DIN3202-F4

IMPA/ISSA	PN	DN	Face to face	Flange diam.	Flange Pitch	Flange Hole	RIKEX ID
		(mm)	L(mm)	D(mm)	C(mm)	*nd(mm)**
755601	PN10	40	140	150	110	4×Ф18	197-15
755602	PN10	50	150	165	125	4×Ф18	197-16
755603	PN10	65	170	185	145	4×Ф18	197-17
755604	PN10	80	180	200	160	8×Ф18	197-18
755605	PN10	100	190	220	180	8×Ф18	197-19
755606	PN10	125	200	250	210	8×Ф18	197-20
755607	PN10	150	210	285	240	8×Ф23	197-21
755608	PN10	200	230	340	295	8×Ф23	197-22
755609	PN10	250	250	395	350	12×Ф23	197-23
755610	PN10	300	270	445	400	12×Ф23	197-24
755611	PN10	350	290	505	460	16×Ф23	197-25
755612	PN10	400	310	565	515	16×Ф27	197-26
755613	PN10	500	350	670	620	20×Ф27	197-27
755614	PN10	600	390	780	725	20×Ф30	197-28
Note:	1.Inside screwed stem; Bolted Bonnet; Non-Rising Handwheel. 2.Face to face according to DIN3202-F4

IMPA/ISSA	PN	DN	Face to face	Flange diam.	Flange Pitch	Flange Hole	RIKEX ID
		(mm)	L(mm)	D(mm)	C(mm)	*nd(mm)**
	PN10	40	240	150	110	4×Ф18	197-29
	PN10	50	250	165	125	4×Ф18	197-30
	PN10	65	270	185	145	4×Ф18	197-31
	PN10	80	280	200	160	8×Ф18	197-32
	PN10	100	300	220	180	8×Ф18	197-33
	PN10	125	325	250	210	8×Ф18	197-34
	PN10	150	350	285	240	8×Ф23	197-35
	PN10	200	400	340	295	8×Ф23	197-36
	PN10	250	450	395	350	12×Ф23	197-37
	PN10	300	500	445	400	12×Ф23	197-38
Note:	1.Inside srewed stem; Bolted Bonnet; Non-Rising Handwheel 2.Face to Fact according to DIN3202-F5